cost per sq ft to replace deck boards

Lumberyards price 2-by-6-inch decking boards individually; an 8-foot redwood board costs around $10, which is $1.25 per linear foot. Since you need two foot-long boards for a square foot, that works out to $2.50 per square foot. You need 8 screws per square foot. A pound of screws costs about $5, and there are about 150 

Some deck repair project costs are based on how many workers are needed to finish the job in the amount of time agreed upon between the customer and the service provider. Most contractors charge 15 $25 per square foot for a deck made of pressure-treated wood. Installation of a 16x20-foot wooden 

Replacing individual floor slats is fairly inexpensive on a per-board basis, if doing yourself, but as is more likely the case with many decks, changing several at alone starting near $69 and that can still be done for hire beginning near $200 on a 120 square foot, square deck and under with prices ascending from there.

The replacement of a few worn boards can be limited in cost. A complete overhaul or deck If you're willing to spend more for professional deck repair, the overall average per project is roughly $1,200. Labor costs alone can For reference, deck materials range from $3.50 sf to $35 sf. As you can see, the 

Staining a Deck. $1.82 - $2.73 per square foot. This cost includes deck staining. Price does include stain, prepping, and cleaning. Estimate does not account for replacing deck boards and other repairs. Reported by: ProMatcher Research Team. 98201, Everett, Washington - July 26, 2017 

5, 1,000, Sq. Ft. $ 25, Full labor cost per hour worker #1, $ 500, Daily cost for overhead & equipment. 6, $ 25, Full . 7, 1,100 linear feet of deck boards, $ 25, Full labor cost per hour worker #3, 8, Number of hours worked per day, 1,100 linear feet of deck boards (4.6 fasteners), Seconds, Minutes, Minutes to install 1 sq. ft.

If boards or railings are replaced, they will need to be stained and sealed to match the rest of the deck. Often this work is included in the estimate of the total cost, but in some cases there may be additional charges, particularly if the entire deck must be re-stained and re-sealed. Sealing a deck can cost $1-$5 a square foot; 

How long it take to build an average deck? Our deck, installed, costs approximately $50 ft $70. The cost of your project will depend on factors like size, building materials, and extras to enhance functionality the for treated lumber ranges from $8 $20 per square foot, an estimated total replacement a 16 by 20 

Your contractor may also replace or fix any missing or popped nails or screws that they notice. This is necessary to ensure safety, and will add minimal cost to your overall project. A deck generally needs eight screws per square foot. A pound of screws costs about $5, and there are about 150 screws in a pound, so the 

Install the new boards with teko clips. If the foundation is complete, installation costs for the decking would be approximately $2.50 per sq. ft. . What would labor cost be for removing6 supports and replacing them on a 12 by 24 foot deck cementing them and rerouting a run off drain into a leech bed 

Product Details

Product List