Navigate to the first article: Restoring a Wood Deck. In the first article, you checked your deck for rot. But if you found some, you can't just send your deck out for a month of rehab in a clinic. You need to deal with it yourself. And that can range from replacing just a board here and there to replacing the whole deck. Here is a
The primary technique I used for removing the boards was jamming a crow bar between deck boards and prying up. Any number of pry bars or demolition bars would work just as well. 08-ldw_16_05642. I was anxious to check the condition of the beams that served as the sub-frame so I scraped off the top
Watch this video to find out how to remove old deck boards and install new wood decking the right way so it will last. one end and pry the other end into place before securing it. On the open end of the deck, we're letting the boards just run long so we can come back later and cut them all at once for a good straight line.
If the deck planks were screwed down, you'll just need to remove the screws to pull up damaged deck boards—but if they were nailed down, you'll need to use a circular saw to cut the decking between each joist and pry the short pieces up with a claw hammer or pry bar. Once you've removed the damaged decking, you're
Can your backyard hangout hold out another year or two, or is it time to repair or even replace that old deck? under your deck and viewing the ledger board. If you see no metal or plastic lip over the top of the ledger board, then it's something you should consider as part of a backyard deck renovation.
If the decking was nailed down you will need to use a circular saw to cut the decking between each joist and pry the short pieces up using a claw hammer or pry bar. Your new decking can be installed just as it would be on a new deck. Removing Deck Boards. You can remove deck boards with a pry bar. Previous Article:
I continued rip sawing the old deck boards in sections taking care to saw just past the cross blocking so the remaining boards would be supported and safe to walk on. To prevent sawing into the old deck boards that aren't to be replaced, I pulled up the end of the first board and cut it off with the circular saw:.
Few things around your house take more abuse than your deck. Exposed to the harshest sun, driving rains, ice, and snow, a deck can only take so much before it needs some repair. According to the North American Deck & Railing Association, there are more than 40 million decks in the United States that are at least 20